BPC PowerMaster Manuel du propriétaire télécharger pdf (Page 11)

If the PowerMaster is assigned an ENG ID#:

1. Assign a unique ENG ID#. Refer to page 10.

2. Press ENG on the CAB-2 Remote.

3. Enter the ID# assigned to the PowerMaster.

4. Press INFO.

5. Enter a name and road number for the PowerMaster if desired. Refer to the Legacy Control

System manual for more information.

6. Press SCROLL to display the Type screen.

7. Select the device type

• For LEGACY System with Version 1.4 update select XFMR.

• For LEGACY System with Version 1.3 or lower select DSL.

8. Press SCROLL again to display the Control screen.

9. Select the control mode.

• For LEGACY System with Version 1.4 update select CAB-1, TMCC or LEGACY.

• For LEGACY System with Version 1.3 or lower select CAB-1.

Using TMCC or LEG control modes with LEGACY system Version 1.3 or lower will

result in unexpected operation.

10. Press CTC to exit.

Note!

Setting the device type and control mode for the PowerMaster with a

CAB-2 Remote Control

f the PowerMaster has been assigned an ENG ID# you will need to select a device type and

control mode for the output so the CAB-2 Remote Controller knows how to operate the

controller. You may also give the PowerMaster a name and a road number. If the PowerMaster

has been assigned a TR ID# you will only need to set the control type.

If the PowerMaster is assigned an TR ID#:

1. Assign a unique TR ID#. Refer to page 11.

2. Press TR on the CAB-2 Remote Control.

3. Enter the ID#.

4. Press INFO.

5. Press CLR. Display will ask NAME & ENGINES?

6. Press YES.

6. Press CTC to exit.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Pas de commentaire

BPC PowerMaster Manuel du propriétaire Page 11