BPC PowerMaster Manuel du propriétaire télécharger pdf (Page 6)

Installing Your First LCS Device

he following section describes installation of a new LCS system. If you already have installed

your first LCS component, please skip ahead to the next section titled “Installing additional

LCS devices.”

WheninstallinganewLCSsystem,theprocessyouwillfollowdependsonwhich(ifany)Lionel

Command Base is to be connected to your LCS system. The following sections describe starting a new

LCS installation with a Legacy Base, a Base-1L, or without any command base.

The LCS DB-9 Cable with Power Supply

very LCS system requires exactly one 6-81499 LCS DB-9 Cable with Power Supply. This special

cablehasthreeconnectors:(A)aDB-9,witha“pig-tail”cable-mountpowersupplyconnector

(C)andalsoa10-footcablewithan“LCSPDI”connectoratitsend(B).Seebelow:

ThecablereceivespowerfromtheincludedDCwall-pack(12VDCat1A).PowerforeachLCS

device is supplied through the single LCS data cable. The LCS DB-9 Cable with Power Supply wall-

pack is capable of powering dozens and dozens of LCS devices, depending on type. An additional

power booster/cable extender is available for extremely large LCS installations.

Figure3.TheLCSDB-9CablewithPowerSupply(soldseparately)

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Pas de commentaire

BPC PowerMaster Manuel du propriétaire Page 6